The Smart Controller TRIAC is the ideal and easy solution to control and automate your shop and your home, as it allows you to control the LED lights in your home very easily thanks to the IWIIK and/or TUYA SMART app. Our smart wifi controller can support up to 150w LED. Compatible with GOOGLE HOME and ALEXA. 

Wireless radar detector. transverse this fantastic detector in a false ceiling so that it is not seen. Thanks to its radar signal can install it not visible anywhere. Works behind mirrors, glass and inside ligthing.

SILICONE end cap to connect LED strips for 10-12mm PCB. Resists temperatures from -55°C to 160°C. Aging resistance and weather resistance. Precision-manufactured using high-quality silicone, these caps are designed to withstand the elements and shine in any outdoor environment. The silicone not only provides exceptional protection against wear and weather but also ensures a hermetic seal to keep your LED strip in perfect condition if you apply our special Kafuter adhesive.

Small built-in motion Detector. It uses the local as a form of detection. Adjustable time and brightness. It incorporates a timer of at least 5 seconds to 7 minutes. Range of detection 360 ° and a distance of 6 metres approximately.

Small motion detector only 2 centimeters in diameter, which makes it go completely unnoticed. Adaptable ceiling, led tray or any type of lighting fixture due to its small size. The external area of the detector (capsule of the infrared) can be used in areas wet and outside is IP65.

Infrared surface detector Slim with high sensitivity Use the local source of activation when it enters the detection zone. Adjustable time and brightness, with detector twilight e incorporates a timer of at least 5 seconds to 7 minutes. Maximum range of detection 360 ° and a distance of 6 meters.

Motion detector ideal for boxes of registration or wall with an angle of 160 ° range. Is designed to offer one reduced consumption or LED, has an IP 20 so it is for indoor use. It has a maximum of 600w incandescent and 200w led, isperfect for step spaces, corridors, bathrooms...

Discover the revolutionary Connector Strip with 4 Pressure Terminals for quick and secure electrical connection! Designed to simplify your electrical projects, this strip provides an efficient and reliable solution for your connection needs. With its 4 pressure terminals system, this strip allows you to make electrical connections quickly and effortlessly. The Connector Strip with 4 Pressure Terminals is versatile and adapts to a wide range of electrical applications.

With our soft orange filter you can lower the Kelvin degrees of your luminaire by about 1000K -1500K, depending on the degree of color. For example; if you put it on a 6000k luminaire a filter layer will convert it to 4500k. If you add 2 layers of soft orange filter you will transform it into 3000K, if you add 3 layers you will get 2200K. It cannot be installed in luminaires that exceed 122 cm. It has the relevant approvals. (205)

AVAILABLE IN MORE COLORS

Transparent solderless quick connector for non-waterproof IP20 COB and SMD strips with 10mm PCB. Our IP20 quick connector allows connections to be made on LED strips without the need for soldering by simply tightening the clips on the side of the connector. Super easy to fit. As it is transparent, the joints are not visible.

The 8mm and 10mm connectors are sold in packs of 10. 

1 unit = 10 conectores

Transparent solderless quick connector for non-waterproof IP20 COB and SMD strips with 10mm PCB. Our IP20 quick connector allows connections to be made on LED strips without the need for soldering by simply tightening the clips on the side of the connector. Super easy to fit. As it is transparent, the joints are not visible.

The 8mm and 10mm connectors are sold in packs of 10. 

1 unit = 10 conectores

The Photoelectric sensor is for indoor installation with IP20 protection. This indoor twilight sensor allows luminaires to be switched on/off depending on the ambient conditions. The protection available is IP20. It supports a load of up to 10 amps.

The series - PROFESSIONAL - of our photocontrollers is applicable to control the on / off of public professional lighting, outdoor garden lighting, outdoor building lighting, according to the level of natural ambient lighting.

Our pink filters for LED Lighting are composed of a dichroic filter which is made up of a transparent sheet. This pink transparent sheet has a reflective coating on one of its surfaces that reflects the light to be filtered. (035)

AVAILABLE IN MORE COLORS

Do you want to save time and money?: The 2-way quick connector - PCT-212 - for electrical cable is used to make quick and safe connections in all types of lighting and also in both temporary and permanent electrical installations. With these fast and safe connectors, great cost savings are achieved in assembly.

You want to save time and money: The quick connector 2 inputs - KV221-415 - for electrical cable is used for fast and safe connections in all types of lighting and also in temporary and permanent electrical installations. With these quick and safe connectors, you achieve great cost savings in assembly.